— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
GETTING READY
Basic Steps for Embroidering
This section describes the preparations for embroidering.
The basic steps for embroidering are as follows.
1
Embroidery unit attachment
2
Needle preparation
3
Bobbin thread setup
4
Fabric preparation
Embroidery frame
5
attachment
Pattern selection
6
7
Upper thread setup
Checking the layout
8
16
Attach the embroidery unit.
For details, refer to "Attaching the embroidery unit" (page 19).
↓
Use a needle matched to the fabric.
For details, refer to "Replacing the needle" (page 28).
↓
For the bobbin thread, wind embroidery bobbin thread and set it in
place.
For details, refer to "Winding/Installing the Bobbin" (page 29).
↓
Attach a stabilizer material to the fabric, and hoop it in an embroidery
frame.
For details, refer to "Preparing the Fabric" (page 43).
↓
Attach the embroidery frame to the embroidery unit.
For details, refer to "Attaching the Embroidery Frame" (page 47).
↓
Select an embroidery pattern.
For details, refer to "Selecting Embroidery Patterns" (page 50).
↓
Set up the upper thread according to the selected pattern.
For details on setting up the thread, refer to "Upper Threading" (page 37).
↓
Check and adjust the size and position of the embroidery pattern.
For details, refer to "Adjusting the layout and the size" (page 61).