Install the two additional fans included with the processor.
16.
You can install memory
balancing memory between both processors for improved performance. For more information on
memory configurations, see "Memory Options (on page 47)."
Install the air baffle
17.
Install any full-length expansion boards
18.
previously removed.
Install the access panel (on page 23).
19.
Install the server into the rack
20.
Connect each power cord to the server.
21.
Connect each power cord to the power source.
22.
Power up the server (on page 21).
23.
("Installing a
DIMM" on page 52) on the second processor. HP recommends
("Remove the air
baffle" on page 30).
("Installing a full-length expansion
("Installing the server into the
board" on page 66), if
rack" on page 36).
Hardware options installation 46