Acer TravelMate 4530 Service Manual page 48

Advanced
The Advanced menu screen contains parameters involving your hardware devices. It also provides advanced
settings of the system.
Info. Main
Internal Touchpad:
Infrared Port (FIR):
F1 Help
↑ ↓
← →
Esc Exit
The table below describes the parameters in the screen. Settings in boldface are the default and suggested
parameter settings.
.
Parameter
Infrared Port
Parallel Port
Mode
Base I/O address
Interrupt
DMA channel
42
download service manual and resetter printer at http://printer1.blogspot.com
PhoenixBIOS Setup Utility
Advanced
[Both]
[Enabled]
Select Item F5/F6
Select Menu Enter
Description
Enables, disables or auto detects the infrared port.
Enables, disables or auto detects the parallel port.
Sets the operation mode of the parallel port.
Sets the I/O address of the parallel port.
Sets the interrupt request of the parallel port.
Sets a DMA channel for the printer to operate in
ECP mode. This parameter is enabled only if Mode
is set to ECP.
Security Boot
Item Specific Help
Configure Infrared Port
using options:
[Disable]
No configuration
[Enabled]
User configuration
[Auto]
BIOS or OS chooses
configuration
(OS Controlled)
Displayed when controlled
by OS
Change Values
Select Sub- Menu
Disabled
Enabled
ECP
, EPP, Output only or Bi-
directional
378
/278
IRQ7
DMA3
Exit
F9 Setup Defaults
F10 Save and Exit
Options
/Disabled/Auto
/Disabled/Auto
/IRQ5
/DMA1
Chapter 2