Page 1
TravelMate 4530 Series Service Guide Service guide files and updates are available on the ACER/CSD web; for more information, please refer to http://csd.acer.com.tw PRINTED IN TAIWAN...
Page 4
Conventions The following conventions are used in this manual: Denotes actual messages that appear SCREEN MESSAGES on screen. NOTE Gives bits and pieces of additional information related to the current topic. WARNING Alerts you to any damage that might result from doing or not doing specific actions.
Page 5
DIFFERENT part number code to those given in the FRU list of this printed Service Guide. You MUST use the list provided by your regional Acer office to order FRU parts for repair and service of customer machines.
Page 13
Modem (RJ-11) port • DC-in jack for AC adapter • Acer EasyPort IV connector • Environment Temperature: • Operating: 5 °C to 35 °C • Non-operating: -20 °C to 65 °C • Humidity (non-condensing): • Operating: 20% to 80% •...
Your Acer Notebook tour After knowing your computer features, let us show you around your new computer. Front View Icon Item Description Acer Crystal Eye Web camera for video communication. Display screen Also called Liquid-Crystal Display (LCD), displays computer output.
Click buttons The left and right buttons function like the left (left, center* and and right mouse buttons. right) *The center button serves as Acer Bio- Protection fingerprint reader supporting Acer FingerNav 4-way control function (only for certain models). Status indicators...
Left View Icon Item Description Acer EasyPort IV Connects to Acer EasyPort IV (only for certain connector models). Ethernet (RJ-45) Connects to an Ethernet 10/100/1000-based port network. External display Connects to a display device (VGA) port (e.g. external monitor, LCD projector).
Right View Icon Item Description Kensington lock Connects to a Kensington-compatible computer slot security lock. Optical drive Internal optical drive; accepts CDs or DVDs. Optical disk access Lights up when the optical drive is active. indicator Optical drive eject Ejects the optical disk from the drive. button Emergency eject Ejects the optical drive tray when the computer is...
Bottom View Icon Item Description Battery bay Houses the computer's battery pack. Battery lock Locks the battery in position. Battery release Releases the battery for removal. latch Memory Houses the computer's main memory. compartment Hard disk bay Houses the computer's hard disk (secured with screws).
WLAN, Internet, email, Bluetooth, Arcade and Acer Empowering Technology. The mail and Web browser buttons are pre-set to email and Internet programs, but can be reset by users. To set the Web browser, mail and programmable buttons, run the Acer Launch Manager. Icon...
Touchpad Basics (with fingerprint reader) The following items show you how to use the touchpad with Acer Bio-Protection fingerprint reader: Move your finger across the touchpad (2) to move the cursor. • Press the left (1) and right (4) buttons located beneath the touchpad to perform selection and •...
Using the Keyboard The keyboard has full-sized keys and an embedded numeric keypad, separate cursor, lock, Windows, function and special keys. Lock Keys and embedded numeric keypad The keyboard has three lock keys which you can toggle on and off. Lock key Description Caps Lock...
Windows Keys The keyboard has two keys that perform Windows-specific functions. Description Windows key Pressed alone, this key has the same effect as clicking on the Windows Start button; it launches the Start menu. It can also be used with other keys to provide a variety of functions: : Open or close the Start menu <...
Special Key You can locate the Euro symbol and the US dollar sign at the upper-center and/or bottom-right of your keyboard. The Euro symbol Open a text editor or word processor. Hold <Alt Gr> and then press the <5> key at the upper-center of the keyboard. NOTE: Note: Some fonts and software do not support the Euro symbol.
Apply to confirm the new settings and click OK to complete the process. Acer GridVista is a handy utility that offers four pre-defined display settings so you can view multiple windows on the same screen. To access this function, please go to Start All Programs and click on Acer GridVista.
Double (vertical), Triple (primary at left), Triple (primary at right), or Quad Acer Gridvista is dual-display compatible, allowing two displays to be partitioned independently. Acer Gridvista is dual-display compatible, allowing two displays to be partitioned independently. AcerGridVista is simple to set up: Run Acer GridVista and select your preferred screen configuration for each display from the task bar.
BIOS ROM type Flash ROM BIOS ROM size 1 MB BIOS package Supported protocols Support ISIPP Support Acer UI Support multi-boot Suspend to RAM (S3) Support SMBIOS 2.3 ,PCI2.2. DMI utility for BIOS serial number configurable/asset tag Support PXE Support Y2K solution...
Page 29
System Memory Item Specification Memory controller Built in Memory size 0 MB (no onboard memory) DIMM socket number Supports memory size per socket 2 GB Supports maximum memory size 4 GB Supports DIMM type DDRII SO-DIMM Supports DIMM Speed 667/800 MHz Supports DIMM voltage +1.8V Supports DIMM package...
Page 30
LAN Interface Item Specification LAN Chipset Broadcom BCM5764MKML Supports LAN protocol Integrated 10/100/10000BASE-T transceiver LAN connector type RJ-45 LAN connector location Left side Features Automatic MDI crossover function • PCIe V1.1 compliant • 10/100/10000BASE-T full -duplex/half -duplex MAC • Receive side scaling(RSS)for multi-core processors •...
Page 31
Item Drive Format Disks Spindle speed (RPM) Performance Specifications Buffer size Interface Max. media transfer rate (disk- buffer, Mbytes/s) Data transfer rate (host~buffe r, Mbytes/s) DC Power Requirements Voltage tolerance Combo Drive Module Item Specification Vendor & model name Performance Specification With CD Diskette With DVD Diskette Transfer rate (KB/sec)
Page 32
Item Specification Compatibility Two GPIOs (General Purpose Input and Output) for • customized applications Supports Anti-pop mode when analog power AVDD is • on and digital power is off Support stereo digital microphone interface to improve • voice quality Integrates high pass filter to cancel DC offset •...
Page 33
Item Controller Bluetooth Wireless 802.11 b+g PCMCIA/ 5 in 1 Card Reader Audio Codec Keyboard Item Specification Keyboard controller Total number of keypads Windows logo key Internal & external keyboard work simultaneously Battery Item Specification Vendor & model name Battery Type Pack capacity Number of battery cell Package configuration...
Page 34
Item Specification Viewing Angle (degree) Horizontal: Right/Left Vertical: Upper/Lower Temperature Range (°C) Operating Storage (shipping) LCD Inverter Item Specification Vendor & model name Brightness conditions Input voltage (V) Input current (mA) Output voltage (V, rms) Output current (mA, rms) Output voltage frequency (k Hz) AC Adapter Item Specification...
Chapter 2 System Utilities BIOS Setup Utility The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/ Output System). Your computer is already properly configured and optimized, and you do not need to run this utility. However, if you encounter configuration problems, you may need to run Setup.
Main The Main screen allows the user to set the system time and date as well as enable and disable boot option and recovery. PhoenixBIOS Setup Utility Information Main Advanced Security Power Boot Exit Item Specific Help System Time [13:04:04] <Tab>, <Shift-Tab>, or System Date [04/30/2008]...
Advanced The Advanced screen allows the user to configure the various advanced BIOS options. IMPORTANT:Making incorrect settings to items on these pages may cause the system to malfunction. Unless you have experience adjusting these items, we recommend that you leave these settings at the default values.
Page 39
Parameter Description Submenu Items On chip SATA Enable On chip SATA. Option: Enabled or Disabled SATA Class ID Select the SATA Class ID. Option: IDE-ACHI Class, HyperFlash Class, IDE-HyperFlash Class, IDE Native Mode, Raid Class, ACHI Class, or IDE Legacy Mode SATA IDE Set SATA IDE Combined mode.
Security The Security screen contains parameters that help safeguard and protect your computer from unauthorized use. PhoenixBIOS Setup Utility Information Main Advanced Security Power Boot Exit Item Specific Help Supervisor Password Is Clear Supervisor Password User Password Is Clear controls acces to the HDD 0 Password Is Clear setup utility.
Setting a Password Follow these steps as you set the user or the supervisor password: Use the ↑ and ↓ keys to highlight the Set Supervisor Password parameter and press the Enter key. The Set Supervisor Password box appears: Type a password in the “Enter New Password” field. The password length can not exceeds 8 alphanumeric characters (A-Z, a-z, 0-9, not case sensitive).
Changing a Password Use the ↑ and ↓ keys to highlight the Set Supervisor Password parameter and press the Enter key. The Set Password box appears. Type the current password in the Enter Current Password field and press Enter. Type a password in the Enter New Password field. Retype the password in the Confirm New Password field.
Power The Power screen allows the user to configure CPU and power management options. PhoenixBIOS Setup Utility Information Main Advanced Security Power Boot Exit Item Specific Help Enable ACPI (debug only): [Yes] En/Disable ACPI BIOS High Precision Event Timer [Yes] (Advance Configuration and Power Interface) Debug only, remove this...
Boot This menu allows the user to decide the order of boot devices to load the operating system. Bootable devices includes the USB diskette drives, the onboard hard disk drive and the DVD drive in the module bay. PhoenixBIOS Setup Utility Information Main Advanced...
The AMD screen allows the user to configure memory, thermal management options, and device wakeup behavior. PhoenixBIOS Setup Utility Information Main Advanced Security Power Boot Exit Item Specific Help CBS Options These options are PBS Options common to all platforms. ↑↓...
Exit The Exit screen allows you to save or discard any changes you made and quit the BIOS Utility. PhoenixBIOS Setup Utility Information Main Advanced Security Power Boot Exit Item Specific Help Exit Saving Changes Exit System Setup and Exit Discarding Changes save your changes to Load Setup Defaults CMOS.
BIOS Flash Utility The BIOS flash memory update is required for the following conditions: New versions of system programs • New features or options • Restore a BIOS when it becomes corrupted. • Use the Phlash utility to update the system BIOS flash ROM. NOTE: Create a Crisis Recovery Media (such as USB HDD) before you use the Phlash utility.
Page 48
In flash BIOS, the message Please do not remove AC Power Source displays. NOTE: If the AC power is not connected, the following message displays. Plug in the AC power to continue. Flash is complete when the message Flash programming complete displays. Chapter 2...
Removing HDD Passwords This section provide you with removing HDD/BIOS password method: Remove HDD Password: If you key in wrong HDD password for three time, “HDD password error code” would display on the • screen. See the image below. If you need to solve HDD password locked problem, you can run HDD_PW.EXE •...
Removing BIOS Passwords: If you key in wrong Supervisor Password three time, “System Disabled” displays on the screen. See the image below. To clear the password, perform the following steps: From a DOS prompt, Execute clnpwd.exe Press 1 or 2 to clean the desired password shown on the screen. The onscreen message determines whether the function is successful or not.
Chapter 3 Machine Disassembly and Replacement This chapter contains step-by-step procedures on how to disassemble the notebook computer for maintenance and troubleshooting. Disassembly Requirements To disassemble the computer, you need the following tools: Wrist grounding strap and conductive mat for preventing electrostatic discharge •...
General Information Pre-disassembly Instructions Before proceeding with the disassembly procedure, make sure that you do the following: 1. Turn off the power to the system and all peripherals. 2. Unplug the AC adapter and all power and signal cables from the system. 3.
External Module Disassembly Process External Modules Disassembly Flowchart The flowchart below gives you a graphic representation on the entire disassembly sequence and instructs you on the components that need to be removed during servicing. For example, if you want to remove the main board, you must first remove the keyboard, then disassemble the inside assembly frame in that order.
Removing the Battery Pack 1. Turn computer over. 2. Slide the battery lock/unlock latch to the unlock position. 3. Slide and hold the battery release latch to the release position (1), then slide out the battery pack from the main unit (2).
Removing the ExpressCard dummy card 1. Push the ExpressCard eject button to eject it, then push it all the way in to eject the ExpressCard dummy. 2. Pull it out from the slot. Chapter 3...
Removing the Lower Covers 1. See “Removing the Battery Pack” on page 46. 2. See “Removing the SD dummy card” on page 47. 3. See “Removing the ExpressCard dummy card” on page 48. 4. Loosen the five captive screws in the Memory, HDD, and WLAN bays as shown. Memory Cover Cover...
Page 60
7. Remove the WLAN cover as shown. Chapter 3...
Removing the DIMM Modules 1. See “Removing the Battery Pack” on page 46. 2. Remove the Memory Module cover See “Removing the Lower Covers” on page 49. 3. Push out the release latches on both sides of the DIMM socket to release the DIMM module. 4.
Removing the WLAN Module 1. See “Removing the Battery Pack” on page 46. 2. Remove the WLAN cover. See “Removing the Lower Covers” on page 49. 3. Remove the adhesive tape and disconnect the antenna cables from the WLAN board. 4.
Page 63
5. Detach the WLAN board from the WLAN socket. NOTE: When re-attaching the antenna cables, ensure the black cable is attached to connector -1, while the white cable is attached to connector-2. Chapter 3...
Removing the Hard Disk Drive Module 1. See “Removing the Battery Pack” on page 46. 2. Remove the HDD cover, See “Removing the Lower Covers” on page 49. 3. Use the mylar tab to slide and lift up the hard disk drive module to remove. NOTE: To prevent damage to device, avoid pressing down on it or placing heavy objects on top of it.
Page 65
5. Remove the four screws securing the hard disk to the carrier. Step Size Quantity Screw Type HDD Carrier M3*3.5 (NL) 6. Remove the HDD from the carrier. Chapter 3...
Removing the Optical Drive Module 1. See “Removing the Battery Pack” on page 46. 2. Remove the Memory cover. See “Removing the Lower Covers” on page 49. 3. Remove the screw securing the ODD module. Step Size Quantity Screw Type ODD Module M2.5*5(NL) 4.
Page 67
5. Remove the three screws securing the ODD bracket and remove the ODD bracket from the ODD module. Step Size Quantity Screw Type ODD Bracket M2*3 (NL) 6. Insert a pin in the eject hole of the ODD to eject the ODD tray. 7.
Removing the Switch Cover CAUTION: Using tools to remove the Switch Cover may cause damage to the outer casing. It is recommended that you use your hands to remove the Switch Cover. 1. See “Removing the Battery Pack” on page 46. 2.
Removing the Keyboard 1. See “Removing the Battery Pack” on page 46. 2. See “Removing the Switch Cover” on page 59. 3. Remove the two screws securing the keyboard to the upper case. Step Size Quantity Screw Type Keyboard M2*3 4.
6. Remove the keyboard from the chassis. Removing the Power Board 1. See “Removing the Battery Pack” on page 46. 2. See “Removing the Keyboard” on page 61. 3. Disconnect the Power Board cable from the mainboard. 4. Remove the two securing screws from the Power Board. NOTE: The left hand securing screw is shared by the eKey Board.
Step Size Quantity Screw Type Power Board M2*3 Removing the Launch Board 1. See “Removing the Battery Pack” on page 46. 2. See “Removing the Keyboard” on page 61. 3. Disconnect the Launch Board cable from the mainboard. 4. Remove the two securing screws from the Launch Board. NOTE: The right hand securing screw is shared by the Power Board.
Step Size Quantity Screw Type Launch Board M2*3 Removing the Antenna 1. See “Removing the WLAN Module” on page 52. 2. Remove the Antenna Cables from the securing guides as shown. 3. Turn the computer over, remove the adhesive tape and disconnect the FCC cables to expose the antenna cables underneath.
Page 75
4. Secure the FFC cable out of the way using the adhesive tape. 5. Turn the computer over and push the cables through the underside of the chassis. 6. Turn the computer over, and remove the cable from the mainboard as shown. 7.
Removing the LCD Module 1. Remove the Battery Pack. See “Removing the Battery Pack” on page 46. 2. Remove the Lower Covers. See “Removing the Lower Covers” on page 49. 3. Remove the WLAN Module. See “Removing the WLAN Module” on page 52. 4.
Page 77
7. Remove the four securing screws (two on each side) connecting the LCD module. Step Size Quantity Screw Type LCD Module M2.5*9 (Red callout) LCD Module M2.5*5 (Blue callout) 8. Carefully remove the LCD module from the chassis. Chapter 3...
Removing the Upper Cover 1. See “Removing the Battery Pack” on page 46. 2. See “Removing the LCD Module” on page 66. 3. Turn the computer over. Remove the fifteen screws on the bottom panel. Step Size Quantity Screw Type Lower Cover M2.5x9 Chapter 3...
Page 79
4. Turn the computer over and disconnect the seven cables from the mainboard as shown. Disconnect A as shown. If necessary, remove FFC G Pull back the securing strip and disconnect B and C before beginning. as shown. Chapter 3...
Page 80
Remove the antenna cables from the housing and Release the securing latches and disconnect E as pull back away from the upper cover. shown. Disconnect the Power Board FFC (E) first before Release the securing latches and disconnect F as removing FFC D.
Page 81
Step Size Quantity Screw Type Upper Cover M2.5*9 (NL) 6. Grasp the top left corner first and pry the cover off. 7. Continue moving from left to the right corner and pry it off the lower cover. 8. Move to the bottom right corner and pry it up. Chapter 3...
Page 82
9. The Upper Cover can now be removed from the lower base. Chapter 3...
Removing the Touch Pad Bracket 1. See “Removing the Upper Cover” on page 68. 2. Disconnect the Touch Pad FFC from the Touch Pad board. 3. Peel back cover and remove the securing screw. Step Size Quantity Screw Type Touch Pad Bracket M2.5*3 (NL) Chapter 3...
4. Remove the Touch Pad bracket. IMPORTANT:The Touch Pad cannot be removed individually. To replace the Touch Pad, replace the entire Upper Cover. Removing the Left Speaker Module 1. See “Removing the Upper Cover” on page 68. 2. Peel back the adhesive strip to expose the speaker cabling. 3.
Page 85
Step Size Quantity Screw Type Left Speaker M2.5*3 (NL) Module 4. Remove the Speaker Module as shown. Chapter 3...
Removing the Right Speaker Module 1. See “Removing the Upper Cover” on page 68. 2. Remove the two securing screws from the speaker module. Step Size Quantity Screw Type Right Speaker M2.5*3 (NL) Module 3. Grip the Speaker Module and remove. Chapter 3...
Removing the Bluetooth Module 1. See “Removing the Upper Cover” on page 68. 2. Remove the adhesive strip to expose the Bluetooth cable. 3. Disconnect the bluetooth cable as shown. 4. Lift the corner of the module up, then grasp to remove. Chapter 3...
Removing the USB Board 1. See “Removing the Upper Cover” on page 68. 2. See “Removing the Bluetooth Module” on page 77. 3. Remove cable from the USB board. 4. Remove the two securing screws from the USB board and lift clear of the chassis. Step Size Quantity...
Removing the Modem Module 1. See “Removing the Upper Cover” on page 68. 2. Disconnect the modem cable as shown in the following images. 3. Remove the two securing screws from the modem module. Step Size Quantity Screw Type Modem Module M2*3 (NL) 4.
Removing the Mainboard 1. See “Removing the LCD Module” on page 66. 2. See “Removing the Upper Cover” on page 68. 3. See “Removing the Modem Module” on page 79. 4. Turn the lower base over on a clean surface, and disconnect the DC-IN cable as shown. IMPORTANT:Ensure the cable can easily pass through the lower cover during mainboard dissasembly.
Page 91
6. Remove the two securing screws from the Mainboard. Step Size Quantity Screw Type Mainboard M2.5*9 (NL) Green Callout Mainboard M2.5*3 (NL) Red Callout 7. Lift the mainboard to expose the DC-IN jack and USB cable. 8. Remove the DC-IN jack and USB cable as shown. Chapter 3...
Page 92
9. Continue to lift the mainboard and remove from the lower cover. Chapter 3...
Removing the RJ-11 Port 1. See “Removing the Upper Cover” on page 68. 2. See “Removing the Right Speaker Module” on page 76. 3. See “See “Removing the LCD Module” on page 66.” on page 80. 4. Disconnect the RJ-11 cable from the modem module. 5.
Removing the CPU Fan 1. See “Removing the Mainboard” on page 80. 1. Disconnect the fan cable from the mainboard as shown. 2. Remove the single captive screw to release the module. 3. Remove the fan module as shown Chapter 3...
Removing the Thermal Module 1. See “Removing the Mainboard” on page 80. 2. See “Removing the CPU Fan” on page 84. 3. Remove the four (4) securing screws from the CPU plate. Step Size Quantity Screw Type CPU Thermal M2.5*3 Module NOTE: When replacing, ensure the screws are replaced in the order as marked on the plate.
Removing the CPU 1. See “Removing the Thermal Module” on page 85. 2. Using a flat screwdriver, turn the CPU socket latch counter-clockwise 180° to release the CPU. 3. Lift the CPU clear of the Mainboard. Chapter 3...
LCD Module Disassembly Process LCD Module Disassembly Flowchart Screw List Step Screw Quantity Color Part No. LCD Bezel M2.5*5 (NL) Black MA000007YG0 Inverter Board M2.5*5 (NL) Black MA000007YG0 Camera Module M2*3 (NL) Black MA0000060G0 LCD Panel M2.5*5 (NL) Black MA000007YG0 LCD Brackets M2*3 (NL) Black...
Removing the LCD Bezel 1. See “Removing the LCD Module” on page 66. 2. Remove the two upper and two lower bezel screw caps. Remove the four securing screws from the LCD module. Step Size Quantity Screw Type LCD Bezel M2.5*5 (NL) 3.
Removing the Inverter Board 1. See “Removing the LCD Bezel” on page 88. 2. Remove the securing screw. Step Size Quantity Screw Type Inverter Board M2.5*3 (NL) 3. Remove the inverter board and disconnect the left and right Inverter board cables as shown.. Chapter 3...
Removing the Camera Module 1. See “Removing the LCD Bezel” on page 88. 2. Remove the securing screw. Step Size Quantity Screw Type Camera Module M2.5*3 (NL) bracket 3. Disconnect the Camera Module cable as shown. Chapter 3...
Page 101
4. Lift the Camera Module clear of the LCD Module and remove the single securing screw on the bracket. Step Size Quantity Screw Type Camera Board M2*2.3 Chapter 3...
Removing the LCD Panel 1. See “Removing the LCD Bezel” on page 88. 2. Lift the LCD Panel clear of the LCD Module, taking care to ensure the cables are free from the back cover. Chapter 3...
Removing the LCD Brackets and FPC Cable 1. See “Removing the Battery Pack” on page 46. 2. See “Removing the Lower Covers” on page 49. 3. See “Removing the WLAN Module” on page 52. 4. See “Removing the Keyboard” on page 61. 5.
Removing the Antennas 1. See “Removing the Battery Pack” on page 46. 2. See “Removing the Lower Covers” on page 49. 3. See “Removing the WLAN Module” on page 52. 4. See “Removing the LCD Panel” on page 92. 5. Remove the strips holding the antenna cables in place. Ensure the cables are free from obstructions. 6.
Removing the MIC Module 1. See “Removing the Battery Pack” on page 46. 2. See “Removing the Lower Covers” on page 49. 3. See “Removing the WLAN Module” on page 52. 4. See “Removing the LCD Panel” on page 92. 5.
LCD Module Reassembly Procedure Replacing the LCD Panel 1. Align the LCD brackets with the eight screw holes (four on each side) on the LCD Panel as shown. 2. Secure the LCD brackets to the LCD panel. 3. Turn the panel over. Insert the LCD Panel cable into the LCD Panel as shown. Chapter 3...
Page 108
4. Replace the MIC cable under the mylar tab strips, and replace the MIC as shown. Secure the cable by pressing down on the strips. 5. Replace the antenna cables and assembly. 6. Replace the tabs securing the left and right antennas to the LCD module. 7.
Page 109
8. Secure the cable by pressing down on the securing 9. Replace the two securing screws on the LCD strip. Module. 10. Replace the camera board in the bracket. 11. Replace the securing screw on the camera board. 12. Replace the Camera Module in the bottom cover. 13.
Page 110
14. Connect the Camera Module cable as shown. 15. Connect the left and right Inverter board cables as shown. 16. Connect the left and right Inverter board cables as shown. 17. Press the inverter board in place to secure. Chapter 3...
18. Replace the securing tapes from the left and right sides of the Inverter board as shown. NOTE: Tuck the cables securely to prevent damage to the cables or module. Replacing the LCD Bezel 1. Align the edge of the bezel with the bottom cover and replace the LCD Module. 2.
Main Module Reassembly Procedure Replacing the CPU 1. Carefully turn the mainboard upside down (CPU 2. Using a flat-tipped screw driver, lock the CPU in side up), and insert the CPU into the CPU bracket the socket as shown. as shown. Replacing the Thermal Module 1.
Replacing the CPU Fan 1. Align and place the Fan Module in the mounting as 2. Tighten the securing screw on the module. shown. 3. Connect the fan module cable to the mainboard. Chapter 3...
Replacing the RJ-11 Port 1. Push the jack in as shown. 2. Using the tweezers, grasp the end of the cable and press down to attach it to the base. 3. Connect the RJ-11 cable to the modem module. Replacing the Mainboard 1.
Page 115
2. Turn the base rightside up, and connect the bluetooth cable to the bottom right of the mainboard as shown. 3. Turn the lower base over on a clean surface, and connect the DC-IN cable as shown. IMPORTANT:Ensure the cable can easily pass through the lower cover during the process. Chapter 3...
Replacing the Modem Module 1. Replace the module from the lower base. 2. Tighten the two (2) securing screws on the modem module. 3. Connect the modem cable as shown in the following images. Replacing the USB Board 1. Angle the right side of the USB board into the lower base. Align the screw sockets and replace the two securing screws.
Replacing the Bluetooth Module 1. Position the module and insert in place. 2. Connect the bluetooth cable as shown. 3. Replace the adhesive strip to cover the Bluetooth cable. Replacing the Right Speaker Module 1. Replace the the speaker module as shown. 2.
Replacing the Launch Board 1. Replace the two securing screws on the Launch Board. NOTE: The right hand securing screw is shared by the Power Board. 2. Connect the Launch Board cable to the mainboard. Chapter 3...
Replacing the Touch Pad Bracket IMPORTANT:The Touch Pad cannot be removed individually. To replace the Touch Pad, replace the entire Upper Cover. 1. Replace the Touch Pad bracket. 2. Replace back cover and the securing screw. 3. Connect the Touch Pad FFC to the Touch Pad board. Replacing the Left Speaker Module 1.
Page 121
4. While holding the mylar cover back with one hand, 6. Replace the two securing screws on the left replace the speaker cable in its housing. speaker. 5. Replace the mylar cover to secure the cable. Replacing the Upper Cover 1.
3. Replace the five screws on the top panel. 4. Turn the computer over. Replace the nine screws on the bottom panel. Replacing the LCD Module 1. Carefully align the LCD module over the hinge sockets and lower the module into the chassis. 2.
Page 124
3. Connect the the LCD, MIC and back light cables. 4. Turn the computer over and replace the two securing screws on the bottom of the chassis. Chapter 3...
Replacing the Antenna Cables Ensure that the three Antenna cables pass through the Mainboard and are accessible from the underside of lower cover. 1. Insert the Antenna Cables through the Upper 2. Pull the cables through. Cover. Make sure they are accessible from the underside.
Replacing the Keyboard 1. Align the FFC with the connector and press the 2. Turn the keyboad over and press down to secure. latch down to secure. Replacing the Switch Cover 1. Insert the left side of the switch cover and angle 2.
Replacing the WLAN Module 1. Insert the WLAN board into the WLAN socket. 2. Replace the two screws to secure the module. 3. Connect the two antenna cables to the module. Replacing the Hard Disk Drive Module 1. Place the HDD in the HDD carrier. 2.
3. Insert the HDD, interface side first, until HDD firmly slides in place. Replacing the DIMM Modules NOTE: To replace DIMM Module 2, first remove DIMM Module 1. In this procedure, only DIMM Module 1 is shown. 1. Insert the DIMM Module flush with the connector and press down to lock in place. Chapter 3...
Replacing the ODD Module 1. With the ODD tray in the eject position, replace the 2. Press the cover into the tray, bottom edge first, to ODD cover on the new ODD Module. secure. 3. Turn the ODD over and replace the three securing 4.
Replacing the Lower Covers 1. Replace the Memory Cover. 2. Replace the single screw to secure in place. 3. Replace the WLAN Cover. 4. Replace the screw to secure in place. 5. Replace HDD Cover. 6. Replace the two screws to secure in place. Chapter 3...
Replacing the Express and SD Card Trays 1. Insert the Express Card and push into the slot until 2. Insert the SD Card and push into the slot until flush flush with the chassis cover. with the chassis cover. Chapter 3...
Common Problems Use the following procedure as a guide for computer problems. NOTE: The diagnostic tests are intended to test only Acer products. Non-Acer products, prototype cards, or modified options can give false errors and invalid system responses. Obtain the failing symptoms in as much detail as possible.
Power On Issue If the system doesn’t power on, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Computer Shutsdown Intermittently If the system powers off at intervals, perform the following actions one at a time to correct the problem. Check the power cable is properly connected to the computer and the electrical outlet.
No Display Issue If the Display doesn’t work, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: No POST or Video If the POST or video doesn’t display, perform the following actions one at a time to correct the problem. Make sure that the internal display is selected.
Abnormal Video Display If video displays abnormally, perform the following actions one at a time to correct the problem. Reboot the computer. If permanent vertical/horizontal lines or dark spots display in the same location, the LCD is faulty and should be replaced. See “Disassembly Process” on page 44. If extensive pixel damage is present (different colored spots in the same locations on the screen), the LCD is faulty and should be replaced.
LCD Failure If the LCD fails, perform the following actions one at a time to correct the problem. Do not replace a non- defective FRUs: Built-In Keyboard Failure If the built-in Keyboard fails, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Chapter 4...
Touchpad Failure If the Touchpad doesn’t work, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Internal Speaker Failure If the internal Speakers fail, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Chapter 4...
Sound Problems If sound problems are experienced, perform the following actions one at a time to correct the problem. Reboot the computer. Navigate to Start Control Panel System and Maintenance System Device Manager. Check the Device Manager to determine that: The device is properly installed.
Internal Microphone Failure If the internal Microphone fails, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Microphone Problems If internal or external Microphones do no operate correctly, perform the following actions one at a time to correct the problem.
HDD Not Operating Correctly If the HDD does not operate correctly, perform the following actions one at a time to correct the problem. Disconnect all external devices. Run a complete virus scan using up-to-date software to ensure the computer is virus free. Run the Windows Vista Startup Repair Utility: insert the Windows Vista Operating System DVD in the ODD and restart the computer.
ODD Failure If the ODD fails, perform the following actions one at a time to correct the problem. Do not replace a non- defective FRUs: ODD Not Operating Correctly If the ODD exhibits any of the following symptoms it may be faulty: Audio CDs do not play when loaded •...
Page 143
Check that there are no yellow exclamation marks against the items in lDE ATA/ATAPI controllers. If a device has an exclamation mark, right-click on the device and uninstall and reinstall the driver. Check that there are no yellow exclamation marks against the items in DVD/CD-ROM drives. If a device has an exclamation mark, right-click on the device and uninstall and reinstall the driver.
Page 144
Repeat for the other ATA Devices shown if applicable. Drive Not Detected If Windows cannot detect the drive, perform the following actions one at a time to correct the problem. Restart the computer and press F2 to enter the BIOS Utility. Check that the drive is detected in the ATAPI Model Name field on the Information page.
USB Failure (Rightside) If the rightside USB port fails, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Modem Function Failure If the internal Modem fails, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Chapter 4...
If the WLAN fails, perform the following actions one at a time to correct the problem. Do not replace a non- defective FRUs: EasyTouch Button Failure If the Acer EasyTouch buttons fail, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Chapter 4...
MediaTouch Button Failure If the Acer MediaTouch buttons fail, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Fingerprint Reader Failure If the Fingerprint Reader fails, perform the following actions one at a time to correct the problem. Do not...
Thermal Unit Failure If the Thermal Unit fails, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: HDTV Switch Failure If the HDTV Switch fails, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Chapter 4...
External Mouse Failure If an external Mouse fails, perform the following actions one at a time to correct the problem. Try an alternative mouse. If the mouse uses a wireless connection, insert new batteries and confirm there is a good connection. See the mouse user manual.
Issue” on page 124.): Power-off the computer. Visually check them for damage. If any problems are found, replace the FRU. Remove or disconnect all of the following devices: Non-Acer devices • Printer, mouse, and other external devices • Battery pack •...
POST Codes Tables These tables describe the POST codes, drivers, and keys for the POST. Port 80 POST Codes The following table details the Port 80 POST codes and drivers used in the POST. Port 80 Port 80 Driver Name Driver Name Code Code...
POST Keys and Messages The following keys are available during POST. Function Enter into Setup Menu Enter into Boot Manager The following messages display during POST: Before press function key CPUID : XXXXXX Press F2 go to Setup Utility Press F12 go to Boot Manager Press [PXE HOT KEY] go to PXE Setup Menu After press function key If user pressed F2...
Clearing Password Check and BIOS Recovery This section provide you the standard operating procedures of clearing password and BIOS recovery for TravelMate 4530. TravelMate 4530 provide one Hardware Open Gap on main board for clearing password check, and one Hotkey for enabling BIOS Recovery. Clearing Password Check Hardware Open Gap Description Item...
BIOS Recovery by Crisis Disk BIOS Recovery Boot Block: BIOS Recovery Boot Block is a special block of BIOS. It is used to boot up the system with minimum BIOS initialization. Users can enable this feature to restore the BIOS firmware to a successful one once the previous BIOS flashing process failed.
DIFFERENT part number code from those given in the FRU list of this printed Service Guide. You MUST use the local FRU list provided by your regional Acer office to order FRU parts for repair and service of customer machines.
LCD Module Item Description Part No. Item Description Part No. Camera Module MIC Cable Camera Bracket LCD Bracket Right LCD Cable Antenna Right LCD Bracket Inverter Board Left Antenna Left LCD Module LCD Bezel Chapter 6...
Page 164
Category Description Part Number CABLE TV BOARD CABEL CABLE MEDIA BOARD FFC CABLE ANTENNA-R CABLE ANTENNA-L CABLE T/P FFC CABLE POWER CORD US 3 PIN 27.TAVV5.001 CABLE POWER CORD EU 3 PIN 27.TAVV5.002 CABLE POWER CORD AUS 3 PIN 27.TAVV5.003 CABLE POWER CORD UK 3 PIN 27.TAVV5.004...
Page 165
Category Description Part Number CASE/COVER/ FINGER PRINT BOARD BRACKET BRACKET ASSEMBLY CASE/COVER/ EXPRESS DUMMY CARD BRACKET ASSEMBLY CASE/COVER/ SD DUMMY CARD BRACKET ASSEMBLY CASE/COVER/ RAM DOOR BRACKET ASSEMBLY CASE/COVER/ HDD DDOR BRACKET ASSEMBLY CASE/COVER/ MINI PCI DOOR BRACKET ASSEMBLY CPU/PROCESSOR COMBO DRIVE COMBO DRIVE DVD SUPER MULTI DRIVE PIONEER DVR-TD08RS...
Page 166
Category Description Part Number HDD/HARD DISK HDD SATA 120G 5400RPM WD WD1200BEVS-22UST0 DRIVE HDD/HARD DISK HDD SATA 160G 5400RPM HGST HTS542516K9SA00 DRIVE HDD/HARD DISK HDD SATA 160G 5400RPM HGST HTS543216L9A300 DRIVE HDD/HARD DISK HDD SATA 160G 5400RPM TOSHIBA MK1646GSX 0FA DRIVE HDD/HARD DISK HDD SATA 160G 5400RPM TOSHIBA MK1652GSX 0FA...
Page 167
Category Description Part Number KEYBOARD KEYBOARD KO BLACK AS KEYBOARD KEYBOARD NW BLACK AS KEYBOARD KEYBOARD PO BLACK AS KEYBOARD KEYBOARD RU BLACK AS KEYBOARD KEYBOARD SA/CR BLACK AS KEYBOARD KEYBOARD SV BLACK AS KEYBOARD KEYBOARD SP BLACK AS KEYBOARD KEYBOARD SD/FN BLACK AS KEYBOARD KEYBOARD SW BLACK AS...
Appendix A Model Definition and Configuration Aspire 5530 Series ( not available yet for TravelMate4530, we will update soon Acer DIMM DIMM HDD 1 Wireless Finger Model Country Part Description Bluetooth (GB) Print AS553 LX.AR AS5530G- ATRM N15.4 N250 NSM8...
Page 171
Acer DIMM DIMM HDD 1 Wireless Finger Model Country Part Description Bluetooth (GB) Print AS553 ACLA- LX.AR AS5530G- ATUZ N15.4 N320 NBDC 3rd WiFi BT 2.0 AES16 Spanish V0X.0 823G32Bi EM WXGA GBII6 GBII6 GB5.4 B2XS 823G3 VHP32ATEA3 82MEXTHM2 56CO 2G+1G/ 320/BT/8L/5R/ CB_bg_FP_0.
Appendix B Test Compatible Components This computer’s compatibility is tested and verified by Acer’s internal testing department. All of its system ® ® functions are tested under Windows XP Home, Windows XP Pro environment. Refer to the following lists for components, adapter cards, and peripherals which have passed these tests.
Microsoft Windows Vista Environment Test ® ® With Fingerprint Reader SKU Vendor Type Description Cover Test Quanta Wistron Normal wi IMR Adapter Test DELTA Adapter DELTA 90W 1.7x5.5x11 ADP-90SB BBEA LF level 4 DELTA 90W-DE Adapter DELTA 90W 1.7x5.5x11 ADP-90SB BBEN (for OBL Spec.) LV4 LF Audio Codec Test Realtek...
Page 175
Antivirus application McAfee VGA Chip Test 86MEHM AMD 86MEHM w/ HDCP w/o Macrovision VoIP Phone Test Wistron BT VoIP Xpress Wistron Acer Xpress Card Phone Kit Rev 2.0 VRAM Test 256M-GD3 256M GDDR2 WiFi Antenna Test PIFA WiFi Antenna WLAN Test...
This section describes online technical support services available to help you repair your Acer Systems. If you are a distributor, dealer, ASP or TPM, please refer your technical queries to your local Acer branch office. Acer Branch Offices and Regional Business Units may access our website. However some information sources will require a user i.d.