Table of Contents
Advertisement
Advanced
The Advanced menu screen contains parameters involving your hardware devices. It also provides advanced
settings of the system.
Info.
Internal Touchpad:
Infrared Port (FIR):
F1
Help
← →
Esc
Exit
The table below describes the parameters in the screen. Settings in boldface are the default and suggested
parameter settings.
.
Parameter
Infrared Port
Parallel Port
Mode
Base I/O address
Interrupt
DMA channel
40
PhoenixBIOS Setup Utility
Main
Advanced
[Both]
[Enabled]
Select Item
↑ ↓
Select Menu
Enables, disables or auto detects the infrared port.
Enables, disables or auto detects the parallel port.
Sets the operation mode of the parallel port.
Sets the I/O address of the parallel port.
Sets the interrupt request of the parallel port.
Sets a DMA channel for the printer to operate in
ECP mode. This parameter is enabled only if Mode
is set to ECP.
Security
F5/F6
Change Values
Enter
Select
Sub- Menu
Description
Boot
Exit
Item Specific Help
Configure Infrared Port
using options:
[Disable]
No configuration
[Enabled]
User configuration
[Auto]
BIOS or OS chooses
configuration
(OS Controlled)
Displayed when controlled
by OS
F9
Setup Defaults
F10
Save and Exit
Options
Disabled
/Disabled/Auto
Enabled
/Disabled/Auto
ECP
, EPP, Output only or Bi-
directional
378
/278
IRQ7
/IRQ5
DMA3
/DMA1
Chapter 2
Advertisement
Table of Contents
