Table of Contents
Advertisement
Charging the battery pack
1
Close the LCD screen and attach
the battery pack.
Align the indentation on the camcorder
and projection on the battery pack, then
slide the battery pack upwards.
2
Connect the AC Adaptor () and
the power cord (mains lead) ()
to your camcorder and the wall
outlet (wall socket).
The POWER/CHG (charge) lamp turns
orange.
The POWER/CHG (charge) lamp turns
off when the battery pack is fully charged.
Disconnect the AC Adaptor from the DC
IN jack of your camcorder.
Notes
You cannot attach any "InfoLITHIUM" battery pack other than the V series to your camcorder.
When attaching a video light (sold separately), it is recommended that you use an NP-FV70 or NP-FV100
battery pack.
You cannot use the NP-FV30 "InfoLITHIUM" battery pack with your camcorder.
In the default setting, the power turns off automatically if you leave your camcorder without any
operation for about 2 minutes, to save battery power ([Power Save], p. 52).
GB
0
Battery pack
POWER/CHG (charge) lamp
DC plug
To the wall outlet (wall socket)
DC IN jack
Align the mark
on the DC plug
with that on the
DC IN jack
Advertisement
Table of Contents
