Inserting A Multibay Device - Compaq Evo Notebook n200 Reference Manual

Inserting a MultiBay Device

If a weight-saver is installed in the MEU MultiBay, you must
remove it before inserting another device. See "Removing a
MultiBay Device" later in this chapter for more information.
To insert a device into the MultBay:
1. Prepare the device for inserting, if necessary, according to the
instructions included with the device.
✎
A hard drive must be installed in an adapter before it can be
inserted in the MultiBay. For more information, refer to the
instructions included with the hard drive.
2. Push the device into the MultiBay until it clicks into place.
Reference Guide
Using the MEU
3–3