1090 Bluetooth Daughter Card (Bdc-2) - Lenovo ThinkPad Edge 11 Hardware Maintenance Manual

Table 15. Removal steps of palm rest assembly, power-on board assembly (with cable), and microphone (continued)
When installing:
Make sure that all the projections of the palm rest assembly are attached firmly to the guide holes of the base cover.

1090 Bluetooth daughter card (BDC-2)

For access, remove these FRUs in order:
• "1010 Battery pack" on page 54
• "1020 Bottom door" on page 56
• "1030 Hard disk drive or solid state drive" on page 58
• "1070 Keyboard" on page 61
• "1080 Palm rest assembly, power-on board assembly (with cable), and microphone" on page 64
1
2
.
Chapter 8 Removing and replacing a FRU
67