Connecting External Devices; Operating External Devices - Compaq N400c - Evo Notebook - PIII 700 MHz Reference Manual

Connecting External Devices

To connect devices to the MEU:
1. Turn off power to the computer, MEU, and all devices.
2. Connect external devices to the connectors on the MEU rear
panel and turn on power to all devices.
✎
To complete the device connections, some manufacturers require
that you install software drivers. Refer to the documentation
included with the device for details.

Operating External Devices

To ensure that devices connected to the MEU are activated, refer
to the following guidelines:
I
When adding a device to or removing a device from the
MEU, turn off power to the computer, MEU, and applicable
devices before connecting or disconnecting.
I
When the computer is connected to the MEU, ensure all
attached devices are turned on, then turn on power to the
computer.
Reference Guide
Connecting and Disconnecting the Computer
2–7