Route the cable along the Processor 1 DIMM baffle and connect the cable to the cache module.
o
Route the cable along the Processor 2 DIMM baffle and connect the cable to the SAS controller
o
option.
Install the access panel (on page 14).
6.
Install the server blade
7.
HP Trusted Platform Module option
Use these instructions to install and enable a TPM on a supported server blade. This procedure includes three
sections:
Installing the Trusted Platform Module board (on page 43).
1.
Retaining the recovery key/password (on page 44).
2.
Enabling the Trusted Platform Module (on page 45).
3.
Enabling the TPM requires accessing RBSU
information about RBSU, see the HP website (http://www.hp.com/go/ilomgmtengine/docs).
("Installing a server
blade" on page 21).
("HP ROM-Based Setup
Utility" on page 56). For more
Hardware options installation 42