Table of Contents
Advertisement
58
Getting Started
Using external display devices
Disabling or enabling the touch pad
The touch pad is enabled by default. To enable/disable the touch
pad, press
touch pad" on page
Connecting an external device
NOTE
You can easily attach an external device your computer.
To do this:
1
Read the directions that came with the device to see if you first
need to install new software.
2
Connect the device's video or USB cable to the port on the
computer and to the device.
3
Connect the device's power cable to a live electrical outlet
(if applicable).
4
Turn on the external device (if applicable).
Your computer may automatically detect the external device.
Using external display devices
Your computer comes with a built-in display, but you can also
connect the following type of external display device to the video
port described below:
NOTE
An HDMI™-compatible television or external display device via
the HDMI™ Out port*
(Sample Illustration) Video port on left side of computer
F5
. For more information, see
138.
Depending on your system, some models may include USB 3.0
port(s). To distinguish these ports, please look for the blue inset
within the USB 3.0 port (if available).
To locate your HDMI™ port, please refer to your Quick Start
document.
HDMI™ Out port*
"Disabling or enabling the
*Available on certain models
Advertisement
Table of Contents
