Is A Connected Port's Expansion Port Status Led Off; Is A Connected Port's Ethernet Link Status Led Off; Is The Power Supply's Ac Power Good Led Off - HP StorageWorks 2000fc - G2 Modular Smart Array User Manual

Is a connected port's Expansion Port Status LED off?

Answer
No
Yes

Is a connected port's Ethernet link status LED off?

Answer
No
Yes

Is the power supply's AC Power Good LED off?

Answer
No
Yes
46 Troubleshooting
Possible Reasons
System functioning properly.
The link is down.
Possible Reasons
System functioning properly.
The link is down.
Possible Reasons
System functioning properly.
The power supply is not receiving
adequate power.
Actions
No action required.
• Check cable connections.
• Reseat cables.
• Replace cables.
• In SMU, review the event logs for
indicators of a specific fault in a
host data path component.
Actions
No action required.
Use standard networking
troubleshooting procedures to isolate
faults on the network.
Actions
No action required.
• Verify that the power cord is
properly connected and check the
power source it is connected to.
• Check that the power supply FRU is
firmly locked into position.
• Check the event log for specific
information regarding the fault.
• Isolate the fault.
• Contact an authorized service
provider for assistance.