Audio Subsystem Components; Back Panel Audio Connectors - Intel DZ77RE-75K Specification

Desktop board
Hide thumbs Also See for DZ77RE-75K:
Table of Contents

Advertisement

1.8.2

Audio Subsystem Components

The audio subsystem includes the following components:
Intel Z77 Express Chipset
Realtek ALC898 audio codec
Front panel audio header that supports Intel HD audio and AC '97 audio (a 2 x 5-
pin header that provides mic in and line out signals for front panel audio
connectors) (yellow)
S/PDIF digital audio out header (1 x 4-pin header) (yellow)
S/PDIF digital audio out connector on the back panel
5-port analog audio input/output stack on the back panel
The back panel audio connectors are configurable through the audio device drivers.
The available configurable back panel audio connectors are shown in Figure 4.
NOTE
The back panel audio line out connector is designed to power headphones or amplified
speakers only. Poor audio quality occurs if passive (non-amplified) speakers are
connected to this output.
For information about
The locations of the front panel audio header and S/PDIF audio header
The signal names of the front panel audio header and S/PDIF audio header
The back panel audio connectors
Item
Description
A
Rear surround
B
Center channel and LFE (Subwoofer)
C
S/PDIF out (optical)
D
Line in
E
Line out/front speakers
F
Mic in/side surround
Figure 4. Back Panel Audio Connectors
Product Description
Refer to
Figure 14, page 51
Section 2.2.2.1, page 53
Section 2.2.1, page 50
29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents