NOTE
The back panel audio line out connector is designed to power headphones or amplified
speakers only. Poor audio quality occurs if passive (non-amplified) speakers are
connected to this output.
For information about
The locations of the front panel audio header and S/PDIF audio header
The signal names of the front panel audio header and S/PDIF audio header
The back panel audio connectors
Item
Description
A
Rear surround
B
S/PDIF out (optical)
C
Center channel and LFE
(Subwoofer)
D
Line in
E
Line out/front speakers
F
Mic in/side surround
Figure 4. Back Panel Audio Connectors
Product Description
Refer to
Figure 11, page 47
Section 2.2.2.1, page 49
Section 2.2.1, page 46
27