Audio Headers And Connectors; Back Panel Audio Connectors - Intel DQ57TM Specification

Intel Desktop Board DQ57TML Technical Product Specification
1.11.2

Audio Headers and Connectors

The board contains audio connectors and headers on both the back panel and the
component side of the board. The component-side audio headers include the
following:
• Front panel audio (a 2 x 5-pin header that provides headphone and mic in signals
for front panel audio connectors) (yellow)
• S/PDIF audio header (1 x 4-pin header) (yellow)
• Internal mono speaker header (1 x 2-pin header) (yellow)
For information about
The locations of the front panel audio header, S/PDIF header, and
internal mono speaker header
The signal names of the front panel audio header
The signal names of the S/PDIF header
The signal names of the internal mono speaker header
The back panel audio connectors
1.11.2.1 Analog Audio Connectors
The available configurable back panel audio connectors are shown in Figure 4.
The back panel audio connectors are configurable through the audio device drivers.
For information about
The back panel audio connectors
The front panel headphone output is supported using a separate audio channel pair
allowing multi-streaming audio configurations such as stereo audio conferencing
(through a front panel headset).
22
Item Description
A Audio line in
B Audio line out
C Mic in
Figure 4. Back Panel Audio Connectors
Refer to
Figure 11, page 45
Table 16 and Table 18, page 48
Table 14, page 48
Table 15, page 48
Section 2.2.1, page 44
Refer to
Section 2.2.1, page 44