Table of Contents
Advertisement
1.11.2.1
Analog Audio Connectors
The available configurable back panel audio connectors are shown in Figure 4.
The back panel audio connectors are configurable through the audio device drivers.
For information about
The back panel audio connectors
The front panel headphone output is supported using a separate audio channel pair
allowing multi-streaming audio configurations such as simultaneous 5.1 surround
playback and stereo audio conferencing (through back panel speakers and a front
panel headset, respectively).
1.11.2.2
S/PDIF Header
The S/PDIF header allows connections to coaxial or optical dongles for digital audio
output.
1.11.2.3
Internal Mono Speaker Header
The internal mono speaker header allows connection to an internal, low-power speaker
for basic system sound capability. The subsystem is capable of driving a speaker load
of 8 Ohms at 1 W (rms) or 4 Ohms at 1.5 W (rms).
Item
Description
A
Line in
B
Line out/front speakers
C
Mic in/side surround
Figure 4. Back Panel Audio Connector Options
Product Description
Refer to
Section 2.2.1, page 41
25
Advertisement
Table of Contents
