Graphics Subsystem; Integrated Graphics; Hdmi Port Status Conditions - Intel DH61ZE Specification

Technical product specification
Hide thumbs Also See for DH61ZE:
Table of Contents

Advertisement

1.7

Graphics Subsystem

The board supports system graphics through either Intel Graphics Technology or a
PCI Express 2.0 x16 add-in graphics card.
1.7.1

Integrated Graphics

The board supports integrated graphics through the Intel
®
(Intel
FDI) for processors with Intel Graphics Technology.
NOTE
The board will support up to two integrated graphics interfaces plus one PCI Express
Graphics card simultaneously with required changes to the BIOS setup.
1.7.1.1
Analog Display (VGA)
The VGA port supports analog displays. The maximum supported resolution is 2048 x
1536 (QXGA) at a 75 Hz refresh rate. The VGA port is enabled for POST whenever a
monitor is attached, regardless of the HDMI connector status.
1.7.1.2
High Definition Multimedia Interface* (HDMI*)
The HDMI port supports standard, enhanced, or high definition video, plus multi-
channel digital audio on a single cable. It is compatible with all ATSC and DVB HDTV
standards and supports eight full range channels at 24-bit/96 kHz audio of lossless
audio formats such as Dolby* TrueHD or DTS* HD Master Audio. The maximum
supported resolution is 1920 x 1200 (WUXGA). The HDMI port is compliant with the
HDMI 1.4 specification.
Depending on the type of add-in card installed in the PCI Express x1 connector, the
HDMI port will behave as described in Table 4.
Table 4. HDMI Port Status Conditions
PCI Express x1 Connector Status
No add-in card installed
Non-video PCI Express x1 add-in card installed
Video PCI Express x1 add-in card installed
Note: Default behavior per BIOS setup option.
20
®
Flexible Display Interface
HDMI Port Status
Enabled
Enabled
(Note)
Disabled

Advertisement

Table of Contents
loading

Table of Contents