Setting The Bios Configuration Jumper Block; Location Of The Bios Configuration Jumper; Jumper Settings For The Bios Setup Program Modes - Intel D945PAW Product Manual

Intel Desktop Board D945PAW Product Guide

Setting the BIOS Configuration Jumper Block

NOTE
Always turn off the power and unplug the power cord from the computer before changing the
jumper. Moving the jumper with the power on may result in unreliable computer operation.
Figure 25 shows the location of the desktop board's BIOS configuration jumper.
The three-pin BIOS jumper block enables all board configurations to be done in BIOS Setup.
Table 11 shows the jumper settings for the Setup program modes.
Table 11.

Jumper Settings for the BIOS Setup Program Modes

Jumper Setting
1
3
1
3
1
3
46
Figure 25. Location of the BIOS Configuration Jumper
Mode Description
Normal (default) (1-2) The BIOS uses the current configuration and passwords for
booting.
Configure (2-3) After the Power-On Self-Test (POST) runs, the BIOS
displays the Maintenance Menu. Use this menu to clear
passwords.
Recovery (None) The BIOS recovers data from a recovery diskette in the
event of a failed BIOS update.
1
2
3
OM17708