Intel Desktop Board D915PLWD Product Guide
NOTE
Do not connect an ATA device as a slave on the same IDE cable as an ATAPI master device. For
example, do not connect an ATA hard drive as a slave to an ATAPI CD-ROM drive.
For correct function of the cable:
•
Observe the precautions in "Before You Begin" on page 23.
•
Attach the cable end with the single connector to the Intel desktop board (Figure 16, A).
•
Attach the cable end with the two closely spaced connectors to the drives (Figure 16, B).
36
A
Figure 16. Connecting the IDE Cable
B
OM17857