Removing The Processor; Installing And Removing Memory; Memory Configuration Example - Intel D915PLWD Product Manual

Desktop board

Hide thumbs Also See for D915PLWD:

Table of Contents

Intel Desktop Board D915PLWD Product Guide

Removing the Processor

For instruction on how to remove the processor fan heat sink and processor, refer to the processor

installation manual or the Intel World Wide Web site at:

The Boxed Intel

Pentium

NOTE

To be fully compliant with all applicable Intel SDRAM memory specifications, the boards require

DIMMs that support the Serial Presence Detect (SPD) data structure. You can access the PC

Serial Presence Detect Specification at:

Desktop Board D915PLWD has two 184-pin DDR DIMM sockets providing Channel A and

Channel B. For dual-channel performance, install a matched pair of DIMMs equal in speed and

size (see Figure 13).

NOTE

All other memory configurations will result in single channel memory operation.

4 Processor in the 775-Land Package

DDR SDRAM DIMM MODULE

1 GB, 400 MHz

Figure 13. Memory Configuration Example

Channel A

Channel B

Table of Contents