Overview; Feature Summary; Legacy I/O Controller - Intel D915PDT Specification

Intel Desktop Board D915PDT Technical Product Specification

1.1 Overview

1.1.1 Feature Summary

Table 1 summarizes the major features of the board.
Table 1.

Feature Summary

Form Factor
Processor
Memory
Chipset
Audio
Legacy I/O Control
USB
Peripheral
Interfaces
LAN Support
BIOS
10
ATX (9.60 inches by 9.60 inches [243.84 millimeters by 243.84 millimeters])
Support for the following:
• Intel
® ®
Pentium 4 processor in an LGA775 socket with an 800 or 533 MHz
system bus
• Intel
® ®
Celeron processor in an LGA775 socket with a 533 MHz system bus
• Two DDR SDRAM Dual Inline Memory Module (DIMM) sockets
• Support for DDR 400 MHz and DDR 333 MHz DIMMs
• Support for up to 2 GB of system memory
®
Intel 915P Chipset, consisting of:
• Intel
®
82915P Graphics Memory Controller Hub (MCH)
• Intel
®
82801FB I/O Controller Hub (ICH6)
• 8 Mbit Firmware Hub (FWH)
®
Intel High Definition Audio subsystem using the Realtek ALC860VU audio codec
Legacy I/O controller for diskette drive, serial, parallel, and PS/2* ports
• Support for USB 2.0 devices
• Support for USB anti-theft circuitry on back-panel USB connectors (requires the
®
use of Intel Platform Administrator Technology software, available separately)
• Eight USB ports
• One serial port
• One parallel port
• Four Serial ATA interfaces
• One Parallel ATA IDE interface with UDMA 33, ATA-66/100 support
• One diskette drive interface
• PS/2 keyboard and mouse ports
10/100 Mbits/sec LAN subsystem using the Intel
(PLC) device with ASF 2.0 support
• Intel/AMI BIOS (resident in the 8 Mbit FWH)
• Support for Advanced Configuration and Power Interface (ACPI), Plug and Play,
and SMBIOS
®
82562GX Platform LAN Connect
continued