Setting The Bios Configuration Jumper Block; Location Of The Bios Configuration Jumper Block; Jumper Settings For The Bios Setup Program Modes - Intel D915PBL - 915P Socket 775 ATX Motherboard Product Manual

Intel Desktop Board D915PBL Product Guide

Setting the BIOS Configuration Jumper Block

CAUTION
Always turn off the power and unplug the power cord from the computer before changing the
jumper. Moving the jumper with the power on may result in unreliable computer operation.
The location of the desktop board's BIOS configuration jumper is shown in Figure 27.
Figure 27. Location of the BIOS Configuration Jumper Block
The three-pin BIOS jumper block enables all board configurations to be done in BIOS Setup.
Table 9 shows the jumper settings for the Setup program modes.
Table 9.

Jumper Settings for the BIOS Setup Program Modes

Jumper Setting
3
1
3
1
50
1 3
Mode Description
Normal (default) (1-2) The BIOS uses the current configuration and passwords for
booting.
Configure (2-3) After the Power-On Self-Test (POST) runs, the BIOS
displays the Maintenance Menu. Use this menu to clear
passwords.
Recovery (None) The BIOS recovers data from a recovery diskette in the
event of a failed BIOS update.
OM16987