Mechanical Considerations; Desktop Board D848Pmb Dimensions - Intel D848PMB Specification

Intel Desktop Board D848PMB Technical Product Specification

2.10 Mechanical Considerations

The Desktop Board D848PMB is designed to fit into either a microATX or an ATX-form-factor
chassis. Figure 18 illustrates the mechanical form factor for the Desktop Board D848PMB.
Dimensions are given in inches [millimeters]. The outer dimensions are 9.60 inches by
8.50 inches [243.84 millimeters by 215.90 millimeters]. Location of the I/O connectors and
mounting holes are in compliance with the ATX specification (see Section 1.4).
✏
NOTE
When installing the Desktop Board in a microATX chassis, make sure that peripheral devices are
installed at least 1.5 inches above the main power connector, the diskette drive connector, and the
Parallel ATA IDE connector, and the DIMM sockets.
6.500
[165.10]
6.100
[154.94]
0.00
2.000
[50.8]
3.150
[80.01]
66
1.800
[45.72]
0.00
2.600
[66.04]
Figure 18. Desktop Board D848PMB Dimensions
5.200
[132.08]
6.450
[163.83]
6.200
[157.48]
OM16428