2.
Locate the AGP connector on the board as shown below. Note that the
board's silkscreen (C) indicates the correct final position of the lever (D) on
the RM.
A
D
E
C
3.
Position the RM over the AGP connector as shown below.
4.
Push the lever end of the RM in the direction of the arrow until the two
rearmost tabs (E) spread over the end of the AGP connector.
5.
Push the free end of the RM over the other end of the AGP connector and
press down evenly on both ends of the RM until all four tabs click
underneath the AGP connector. Do not apply unnecessary pressure to avoid
damaging the board.
16
B
Intel Desktop Boards D845PT and D845BG
OM12632
OM10111
OM10180
OM10181
Quick Reference