Connecting Sata Drives; Connecting The Serial Ata Cable - Intel D2500HN Product Manual
Desktop board
Hide thumbs
Also See for D2500HN:
- Specification (92 pages) ,
- Product brief (4 pages) ,
- Product manual (61 pages)
Table of Contents
Advertisement
Installing and Replacing Desktop Board Components
Connecting SATA Drives
The board has two SATA connectors each supporting one SATA drive. The included
SATA cables support the Serial ATA protocol. For correct cable and drive function:
1. Observe the precautions in "Before You Begin" on page 23.
2. Attach one end of the cable to the connector on the board (Figure 8, A) and
connect the other end to the drive (Figure 8, B).
Figure 8. Connecting the Serial ATA Cable
29
Hide quick links:
Advertisement
Table of Contents
