Table of Contents
Advertisement
5
Confirm the notice on continuous
use of your camcorder.
6
Select [Run] and display a subject
on the LCD screen.
If you select [Run Later], the [Auto 3D
Lens Adjust] screen will appear when you
turn on the camcorder next time.
7
When the scale of the indicator
exceeds the mark, select [OK].
The camcorder automatically zooms in or
out to adjust the lenses.
Notes
If you feel uncomfortable viewing the image in 3D, press 2D/3D DISP and check the image in 2D (p. 27).
If [Could not adjust.] appears, touch [Run Again].
If the 2D/3D switch (p. 26) is set to 2D, the [Auto 3D Lens Adjust] screen does not appear.
Indicator
US
1
Advertisement
Table of Contents
