Lenovo ThinkPad 700 Hardware Maintenance Manual page 100

Table 12. Removal steps of HDD cover, HDD and HDD rubber rails or SSD and storage
converter (continued)
92
ThinkPad W700 and W700ds Hardware Maintenance Manual
Note: Mounted number of the hard disk drive depends on the models. In
models with RAID features, two hard disk drives that have same FRU no. must
be used in slot 0 ( a ) and in slot 1 ( b ).
When installing: Make sure that the HDD connector or SSD connector is
attached firmly.
HDD and HDD rubber rails:
When installing: The rubber rails on the hard disk drive must be attached to
the replacement drive. Otherwise the drive cannot be installed properly.
a
b
5
2
4
3
5