Table of Contents
Advertisement
Target DRAM Speed : xxxxMHz
Displays the current DRAM speed.
2.4.1
Memory Frequency [Auto]
Allows you to set the memory operating frequency. Configuration options: [DDR3-800MHz]
[DDR3-1066MHz] [DDR3-1333MHz]
Selecting a very high memory frequency may cause the system to become unstable! If this
happens, revert to the default setting.
2.4.2
iGPU Max. Frequency [Auto]
[Auto]
The iGPU frequency may be optimized depending on the system loading.
[Manual]
The input value is the optimal iGPU frequency. However, the frequency
may vary depending on the system loading.
2.4.3
GPU Boost [OK]
[OK]
Select [OK] to automatically optimize the iGPU frequency.
[Cancel]
Select [Cancel] to use a fixed iGPU frequency.
2.4.4
DRAM Timing Control
The sub-items in this menu allow you to set the DRAM timing control features. Use the <+>
and <-> keys to adjust the value. To restore the default setting, type [auto] using the keyboard
and press <Enter>.
Changing the values in this menu may cause the system to become unstable! If this
happens, revert to the default settings.
2.4.5
CPU Power Management
The sub-items in this menu allow you to set the CPU ratio and features.
CPU Ratio [Auto]
Allows you to manually adjust the maximum non-turbo CPU ratio. Use <+> and <-> keys or
the numeric keypad to adjust the value. The valid value ranges vary according to your CPU
model.
Enhanced Intel SpeedStep Technology [Enabled]
Allows you to enable or disable the Enhanced Intel
[Disabled]
Disables this function.
[Enabled]
The operating system dynamically adjusts the processor voltage and
core frequency which may result in decreased average consumption and
decreased average heat production.
Turbo Mode [Enabled]
This item appears only when you set the previous item to [Enabled].
[Enabled]
Allows processor cores to run faster than marked frequency in specific
conditions.
[Disabled]
Disables this function.
Chapter 2: BIOS information
SpeedStep Technology (EIST).
®
2-13
Advertisement
Table of Contents
