Security
The Security tab allows the user to configure and protect the computer from unauthorized use.
Information
Main
Supervisor Password Is:
User Password Is:
HDD Password Is:
Set Supervisor Password
Set User Password
Set HDD Password
Password on Boot
F1
Help
Esc
Exit
Parameter
Supervisor Password Is
User Password Is
HDD Password Is
Set Supervisor Password
Set User Password
Set HDD Password
Password on Boot
NOTE:
When prompted to enter the password, three attempts are allowed before system halts.
Resetting the BIOS password may require the computer to be returned to the dealer.
2-7
InsydeH20 Setup Utility
Advanced
Security
Clear
Clear
Clear
[Enter]
[Enter]
[Enter]
[Disabled]
Select Item
F5/F6
Select Menu
Enter
Figure 2:4. BIOS Security
Displays "Set" if the supervisor password is set and "Clear" if the
supervisor password is not set.
Displays "Set" if the user password is set and "Clear" if the user
password is not set.
Displays "Set" if the HDD password is set and "Clear" if the HDD
password is not set.
Option to set the supervisor password.
Option to set the user password. Enabled only when the supervisor
password is set.
Option to set the HDD password.
Enable or disable the computer to prompt for the password on
system boot. When disabled, the password is only prompted when
entering the BIOS Setup Utility.
Power
Boot
Change Values
Select
Sub-Menu
Description
Exit
Item Specific Help
Install or Change the password and the
length of password must be greater or
equal one word.
F9
Setup Defaults
F10
Save and Exit
System Utilities
Rev. 3.7