WinFlash Utility
NOTE:
Plug the AC power adaptor to a power source before performing the WinFlash Utility.
Perform the following to use the WinFlash Utility:
Boot from the OS and search for WinFlash Utility file.
1.
Double-click on the utility file. The utility screen appears.
2.
CAUTION:
Do not turn off the computer during the Flash process.
•
Do not put the system into standby or hibernation mode.
•
Do not launch other applications.
•
Do not press the Power button, open/close the lid, dock/undock the system, insert or
•
remove USB, 1394, or PC card.
When the warning message appears, click OK to continue.
3.
System Utilities
Figure 2:19. InsydeFlash Screen
Figure 2:20. Warning Message
2-18