Onboard Devices Configuration; Apm - Asus P8H61-MX USB3 Manual

2.5.6

Onboard Devices Configuration

HD Audio Controller [Enabled]
[Enabled]
[Disabled]
The following two items appear only when you set the HD Audio Controller item to
[Enabled].
Front Panel Type [HD]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC'97 or high-
definition audio depending on the audio standard that the front panel audio module supports.
[HD]
[AC97]
Realtek LAN Controller [Enabled]
[Enabled]
[Disabled]
Realtek PXE OPROM [Disabled]
This item appears only when you set the previous item to [Enabled] and allows you to enable
or disable the PXE OptionRom of the Realtek LAN controller.
Configuration options: [Enabled] [Disabled]
Asmedia USB 3.0 Controller [Enabled] (P8H61-MX USB3 only)
[Enabled]
[Disabled]
Asmedia USB 3.0 Battery Charging Support [Disabled] (P8H61-MX USB3
only)
This item appears only when the Asmedia USB 3.0 Controller item is set to [Enabled].
[Enabled]
[Disabled]
2.5.7

APM

Restore AC Power Loss [Power Off]
[Power On]
[Power Off]
[Last State]
2-20
Enables the High Definition Audio Controller.
Disables the controller.
Sets the front panel audio connector (AAFP) mode to high definition audio.
Sets the front panel audio connector (AAFP) mode to legacy AC'97.
Enables the Realtek LAN controller.
Disables the controller.
Enables the onboard USB 3.0 controller.
Disables the controller.
Enables the Asmedia USB 3.0 battery charging function.
Disables this function
The system goes into on state after an AC power loss.
The system goes into off state after an AC power loss.
The system goes into either off or on state, whatever the system state was
before the AC power loss.
ASUS P8H61-MX Series