Mainboard Removal
Prerequisite
Locate the WLAN antenna cables (see
1.
Disconnect the main (black) and the auxiliary (white) antenna cable connectors and remove
2.
from the guides of the lower case.
Pull the auxiliary (A) antenna cable to pass through the mainboard hole, detach the adhesive
3.
tapes, and then set the antenna cable aside.
Service and Maintenance
Upper Case Removal
Figure 3:59. Removing the Antenna Cables (1 of 2)
A
Figure 3:60. Removing the Antenna Cables (2 of 2)
on page
3-34
Figure
3:10, page 3-12).
3-43