HP D7171A - NetServer - LPr Installation Manual page 15

Chapter 2
WARNING
The HP NetServer LT 6000r weighs up to 100 pounds. At least two
people must be on hand to lift the server into position. Failure to
observe this warning could result in serious injury to you or to the
HP NetServer LT 6000r.
4. Lower the server onto the slide members. Ensure that the mounting hooks
have been properly seated inside the chassis.
5. Pull the HP NetServer LT 6000r forward onto the slides until the nib on the
blue latch snaps into the square hole on the slide. This ensures that the
mounting hooks are properly seated inside the chassis and that the server is
locked into position on the slides.
6. Remove the mounting handles.
Prepare the HP NetServer for Rack Mounting
Remove the Mounting Handles
11