RCA RV-3798 User Manual page 6

First Things First
Step 1: Unpack the Receiver
Unpack the receiver and the accessories. The accessories
packed with the receiver include the remote (CRK67G1), four
AAA batteries, an AM loop antenna, an FM wire antenna,
and Important Safeguards.
Step 2: Connect the Receiver
Before you plug in and turn on your audio/video receiver,
connect the receiver to the components in your system and
connect the speakers.
The next section shows how to connect the receiver to a TV
only. If you are going to connect the receiver to a TV and
VCR, laserdisc player or other component, see Appendix A:
Connecting the Receiver. (Page 37)
For information on connecting your speakers, see Appendix
A: Connecting the Receiver. For three suggestions on placing
your speakers for the best sound, see Appendix B: Speaker
Placement. (Page 47.)
TV Only
Do not plug your TV or VCR into the "switched"
outlet on the back of the receiver.
You will need:
(1) paired (red/white) stereo cable
(1) single (yellow) video cable
or
(1) stereo A/V cable
(1) coaxial cable.
Connect the cables as shown to the right.
4
CABLE
IN
BOX
OUT
OR
TV
L/MONO RIGHT VIDEO
INPUT 1
L/MONO RIGHT VIDEO
INPUT 2
L/MONO RIGHT VIDEO
INPUT 3
AUDIO
DVD
RECEIVER
L
5.1
IN OUT
R
VCR
VCR
IN OUT
CENTER
L
L-SUR
R
REAR
R-SUR
L
SUB
R
WOOFER
AUDIO
TV CD
ANTENNA
S-VIDEO OUTPUT VIDEO L/MONO
BRIDGED
FROM
INPUT 1
VIDEO L/MONO
FIXED
OUTPUT
S-VIDEO VIDEO L/MONO
TV TUNER
OUTPUT
ANT A ANT B
SIGNAL
SOURCE
DVD5.1
VIDEO
DVD/ MONITOR
SAT
LD OUT
DVD/ SAT
LD
AUDIO
1
AUDIO
2
IN OUT SUB WOOFER
TAPE/MD OUT
(MONO)
RIGHT
RIGHT
RIGHT