Create Hp Diagtools Diskettes - HP D7171A - NetServer - LPr Upgrade Manual

Chapter 5
It is recommended that you run DiagTools now and test your NetServer LH 6000
before you reinstall your NOS. To run DiagTools you will:
l
Create two DiagTools diskettes.
l
Run the Basic System Test.
l
Create a Support Ticket to view your test results, or print them and keep a
permanent copy.
l
Use the Error Code Viewer to diagnose failed components, if necessary.
l
Use DiagTools to burn in the NetServer LH 6000, if necessary.

Create HP DiagTools Diskettes

Two blank flexible diskettes are required to run HP DiagTools. A third diskette
can be used to save your test results in a Support Ticket file. Create your diskettes
as follows:
1. Insert the HP NetServer Navigator CD-ROM if it is not already in place,
and power on the NetServer.
2. Choose NetServer Utilities from the Main Menu of the NetServer
Navigator.
3. Choose DiagTools Diskette from the NetServer Utilities menu.
4. Follow the instructions on the screen to create both HP DiagTools
diskettes.
5. Label the diskettes HP DiagTools Diskette #1 and HP DiagTools Diskette
#2.
6. Remove the HP NetServer Navigator CD-ROM and insert HP DiagTools
Diskette #1.
Updating Firmware
35