Installing The Switch Using The Hp Storageworks San Switch Universal Rack Mount Kit - HP StorageWorks 2/8-EL - SAN Switch Installation Manual

Installing the SAN Switch 2/8
Installing the Switch Using the HP StorageWorks SAN Switch
Universal Rack Mount Kit
This section provides instructions for installing the SAN Switch 2/8 in an HP rack
using the HP StorageWorks SAN Switch Universal Rack Mount Kit, part number
331148-B21.
The following items are required:
46
SAN Switch 2/8
Power cables
#2 Phillips screwdriver
7/16 wrench or socket
The SAN Switch Universal Rack Mount Kit rails and rail mounting hardware
listed below:
(2) Rear mounting brackets
A right inner rail and a right outer rail
A left inner rail and a left outer rail
(14) #8-32 x 3/16-inch Phillips pan-head screw with captive
star lock washer
(10) #10-32 x 1/2-inch Phillips pan-head screw with captive
star lock washer
SAN Switch 2/8 Version 3.1.x Installation Guide