Where To Place Your Smart Tv Link 4 Port - Belkin F7D4550 User Manual

geTTing sTaRTeD
3 . Once the Smart TV Link
has successfully joined the
wireless network, disconnect
it from the PC, and unplug
the power supply.
4 . Connect your Smart TV
Link's Ethernet cable to your
TV's Ethernet port*. Plug
the Smart TV Link's power
supply into a wall outlet.
*You can connect up to
4 Ethernet-enabled devices.

Where to Place Your smart TV link 4 Port

For the best results, place the Smart TV Link 4 Port next to your TV or
AV equipment in an open location away from large metal objects and
magnets such as those found in speakers. Raising the Smart TV Link
above floor level can improve the strength of your wireless signal.
Note: Once set up, the device needs to be restored to factory
defaults (either via firmware GUI or via holding the reset button
for 10 seconds, and then repeating the setup process).
3