Table of Contents
Advertisement
geTTing TO KnOW YOUR sMaRT TV linK 4 PORT
front Panel
a) smart TV link 4 Port status light
Your Smart TV Link's status is shown by the light on the front.
Off: The Smart TV Link is not plugged into a power source.
blinking blue: The Smart TV Link is starting up.
blinking blue/amber: Indicates the Smart TV Link needs to be set up.
solid blue: The Smart TV Link is connected to the Wi-Fi
solid amber: The Smart TV Link is connected to the Wi-Fi network,
but the signal is weak. You may experience performance problems.
Consider moving the Smart TV Link closer to the wireless router.
blinking amber: The Smart TV Link is not connected to the Wi-Fi
network. Check to make sure that your wireless router is functioning
properly, and/or move the Smart TV Link closer to the wireless router.
back Panel
a) Wired (lan) Connectors
Connect up to four AV devices such as Internet-Enabled
TVs. Blu-ray™ players, gaming consoles, or other Ethernet-
enabled devices to these ports using Ethernet cables.
b) Reset button
This button is used to restart your Smart TV Link in rare
network.
®
cases when it functions incorrectly. Resetting the Smart
TV Link will preserve your settings. This button may also
be used to restore the factory default settings. Please see
the "Troubleshooting" section for more information.
C) Power Connector
Connect the included power supply to this jack.
4
Advertisement
Table of Contents
