1 . Connect your Smart TV 2 . Open an Internet browser and Smart TV Link 4 Port Link’s Ethernet cable to your type: http://Belkin.smarttv into PC’s Ethernet port. Plug the address bar. A “Welcome the Smart TV Link’s power screen”...
geTTing sTaRTeD Where to Place Your smart TV link 4 Port For the best results, place the Smart TV Link 4 Port next to your TV or AV equipment in an open location away from large metal objects and 4 . Connect your Smart TV 3 .
geTTing TO KnOW YOUR sMaRT TV linK 4 PORT front Panel back Panel a) smart TV link 4 Port status light Your Smart TV Link’s status is shown by the light on the front. a) Wired (lan) Connectors Connect up to four AV devices such as Internet-Enabled Off: The Smart TV Link is not plugged into a power source.
TeChniCal DeTails Technical features system Requirements integrated 802 .11n Wireless bridge Smart TV Link 4 Port Utilizes Dual-Band network technology (2.4GHz and 5GHz), allowing Wireless router interference-free bandwidth to all your connected AV devices. At least one computer with an installed integrated 4-Port 10/100 switch network interface Smart TV Link Your Smart TV Link has a built-in, 4-port network switch...
Your PC needs to be wired to the Smart TV Link in Restart your Smart TV Link. order to access the web interface. Open an Internet browser and type: http://Belkin.smarttv into the address bar. The following steps show you how to update your Smart Smart TV Link 4 Port TV Link’s firmware using its web interface.
Using YOUR sMaRT TV linK 4 PORT Reset button Restoring Your smart TV link to factory Defaults The “Reset” button is used in rare cases when the Smart Press and hold the “Reset” button for at least 10 seconds, TV Link may function improperly. Resetting the Smart TV and then release it.
TROUbleshOOTing, sUPPORT, anD WaRRanTY blinking amber leD This indicates that the Smart TV Link is not connected to your wireless network. Please move the Smart TV Link closer to your router. solid amber leD This indicates that the Smart TV Link is connected to your wireless network, but the signal is weak.
What is not covered by this warranty? 2-Year Product Warranty All above warranties are null and void if the Belkin product is not provided to Belkin for inspection upon Belkin’s request at the sole expense of the purchaser, or if Belkin determines that the Belkin product has been improperly installed, altered in any way, or tampered with.
Belkin reserves the right to review the damaged Belkin product. Some states do not allow limitations on how long an implied All costs of shipping the Belkin product to Belkin for inspection warranty lasts, so the above limitations may not apply to you.
COMPaTibiliTY Rules. These limits are designed to provide reasonable protection We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa against harmful interference in a residential installation. Vista, CA 90094, declare under our sole responsibility that the device, f7D4550v1, complies with Part 15 of the FCC Rules.
RegUlaTORY infORMaTiOn european Compliance statement: Belkin International hereby declares that this F7D4550 Smart TV Link 4 Port is in compliance with the essential requirements and other revelant provisions of the RTT&E Directive 1999/5/EC, the EMC Directive 2004/108/ EC, and the Low Voltage Directive 2006/5/EC. Conformity was assessed using a Technical Construction File.