Wyse C30LE Installation Manual page 16

12
Chapter 3
Step 5: Verifying Cloud Client Operation
After the cloud client displays the WES2009 desktop, you can verify the Version and that
your general client information is correct.
1. On the General tab of the Client Information window (Start > All Programs > Client
2. Click OK to close the Client Information window. The cloud client is ready for operation
Step 6: Attach a Wyse Conversion Label and Microsoft License Label on Each Converted
Cloud Client
The conversion kit is supplied with Wyse Conversion Labels and Microsoft License Labels
that must be attached to each cloud client. Be sure you have purchased the amount of
labels you need.
Step 7: Obtain a Firmware Update
After converting your cloud clients, obtain any available firmware update at
http://www.wyse.com/serviceandsupport/support/downloads.asp.
Information), verify the following:
• Version is 8.01 (Build 0684.2048) for the 2-GB flash configuration.
• Windows WES Version is 5.01 Service Pack 3.
and setup by an administrator. NOTE: Depending on your network setup, the cloud
client may automatically reboot once the device is initially connected to the network.
Tip
For security, automatic logon to a User desktop is enabled on the cloud client
by default (and is a member of the User group; not a member of the
Administrator group). To log on as a different user or an administrator: Use
the Log off button (Start > Log off) to log off the current desktop while
holding down the SHIFT key until the Log On window displays. Log on as
follows (passwords are case sensitive):
Administrators - default Username is administrator and default Password is
Wyse#123.
Users - default Username is user and default Password is Wyse#123.
Administrator and other documentation for your cloud client are available at:
http://www.wyse.com/manuals.
Caution
Failure to install the labels may cause delays in service and support. The
serial number must be given to a Customer Support Technician to validate
entitlement to support and service from Wyse. Failure to do so will result in
the original operating system being loaded on the device and is in breach of
your license agreement.
Caution
Be sure to select the C90LEW option in the Product Downloads Active box,
click Search, and then use the WES C90LEW Image Active Firmware link.
Warning
Use of the Software on more than one device requires that you first purchase
from Wyse additional copies of, or licenses to, the Software. Contact your
local Wyse distributor or Wyse Inside Sales at 1-800-800-9973 option 1 or
1-408-473-1200 option 1.