Wyse C30LE Installation Manual page 13

Installing WES2009 Firmware
Figure 6 Wyse USB Firmware Tool wizard
2. Click Next to open the Select an Option dialog box.
Figure 7 Configuration options
3. Select the Configure a single USB key to Copy or Update firmware option, and
then click Next to open the Select the Configuration dialog box.
Figure 8 Update firmware options
4. Select the Windows Embedded Standard operating system (OS) type option.
5. Select the Update Firmware operation to perform option.
6. (Optional) Leave the default-selected Preserve data partition check box
(recommended in most cases) unless you do not want to preserve any existing custom
9