Wyse C30LE Installation Manual page 14

10
Chapter 3
7. Select all three contents options (OS Image, BIOS, and CMOS).
8. Click Next to open the browse dialog box.
Figure 9 Browse for image file
9. Click Browse.
Figure 10 Browse to select commandsXml.xml
10.Navigate to the CX0LE 2GB WES Conversion Image folder on your hard drive (this is
11. In the browse dialog box, click Next to open the Prepare the USB Drive dialog box.
data partition you have on the cloud client (outside of the partition used by the
firmware).
Tip
This option is only available for use with cloud clients using multiple data
partitions totalling 4 GB or larger, allowing you to remove the partition used
for custom data that is not write filter protected (this is the custom data
partition outside of the partition used for write filter protected firmware).
the location you selected in "Step 1: Copy the CX0LE 2GB WES Conversion Image
Folder to Your Local Hard Drive"), click on the commandsXml.xml file to select it (you
may need to select the All Files option from the Files of Type box to display the
commandsXml.xml file for selection), and then click Open.
Caution
Do not use the commandsXml.xml file directly from the Conversion
Software Assembly DVD-ROM.