HP StorageWorks 16-EL - SAN Switch Release Note page 20

Commands Modified in v3.1.2
Example
The following example first displays the current mode and then enables quiet
mode:
sw5:admin> quietMode
Quiet Mode is OFF
sw5:admin> quietMode 1
Committing configuration...done.
Quiet Mode is now ON
switchShow
The switchShow command now supports the –portcount option, which returns the
number of ports on the switch. The syntax is:
20
switchShow, "–portcount"
SAN Switch 2/16 Fabric OS 3.1.2 Release Notes