Ssmd-1001; Ssmd-1002; Ssmd-1003; Ssmd System Messages - Brocade Communications Systems SN3000B Reference

SSMD System Messages

SSMD-1001

Message
<timestamp>, [SSMD-1001], <sequence-number>,, ERROR, <system-name>,Failed to
allocate memory: <function name>.
Probable Cause Indicates that the specified function has failed to allocate memory.
Recommended Check the memory usage on the switch using the memShow command.
Action
Restart or power cycle the switch.
Severity ERROR

SSMD-1002

Message
<timestamp>, [SSMD-1002], <sequence-number>,, ERROR, <system-name>, Failed to
initialize <module> rc = <error>.
Probable Cause Indicates that the initialization of a module within System Services Manager (SSM) has failed.
Recommended Download a new firmware version using the firmwareDownload command.
Action
Severity ERROR

SSMD-1003

Message
<timestamp>, [SSMD-1003], <sequence-number>,, ERROR, <system-name>, Failed to
lock semaphore mutex: (<function name>).
Probable Cause Indicates that the specified function has failed to lock the mutex (semaphore).
Recommended Restart or power cycle the switch.
Action
Severity ERROR
Fabric OS Message Reference
53-1002448-01
Chapter
100
677