Call Home Setup Fields - HP StorageWorks SN6000 User Manual

Table 17 describes the fields of the Call Home Setup dialog box.
Table 17

Call Home Setup fields

Field
Primary SMTP: (active)
Primary SMTP Server
Address:
Primary SMTP Server Port:
Secondary SMTP:
Secondary SMTP Server
Address:
Secondary SMTP Server
Port:
Contact Email Address:
Phone Number:
Street Address:
84 Managing switches
Description
(active) indicates that the Primary SMTP (Simple Mail
Transfer Protocol) is the SMTP server that Call Home will try
to use when transmitting email messages. Call Home
operates as an SMTP sending agent.
After any system configuration, the Primary SMTP server will
always becomes the active SMTP, provided it is enabled
and has a non-default address defined (0.0.0.0 is the
default).
The IP address of the primary (first) SMTP server.
The service port number that the primary SMTP server is
listening on to accept connections from SMTP sending
agents.
The second SMTP server. If the primary SMTP is not
enabled/defined, or if there is a failure in communicating
with the primary SMTP server, the Secondary SMTP server
will become the (active) SMTP server—the one used by Call
Home for the next attempt to transmit email.
The IP address of the secondary SMTP server.
The service port number that the secondary SMTP server is
listening on to accept connection from SMTP sending
agents.
The email address of the point-of-contact for the switch. This
email address is included in the text of email messages
using the FullText format under the section for Contact
Information.
The phone number of the point-of-contact for the switch. This
value is included in the text of email messages using the
FullText format under the section for Contact Information.
The address of the point-of-contact for the switch. This value
is included in the text of email messages using the FullText
format under the section for Contact Information.