Network Dns Configuration; Network Properties Dialog Box-Dns Fields - HP StorageWorks SN6000 User Manual

Network DNS configuration

The Network Properties dialog box has two tabs: IP and DNS. Click the DNS tab to open the Network
Properties DNS dialog box
Client on the switch and the DNS server to map domain names to IP addresses.
network DNS configuration parameters.
Table 13 Network Properties dialog box—DNS fields
Field
DNS Client
Local Hostname
Server Discovery
DNS Server Addresses
Search List Discovery
Search List Domain Names
(Figure 31). Use the Network Properties DNS dialog box to enable the DNS
Description
Select this option to enable the Domain Name Service
client.
Enter the name of the local host
Choose one of the following methods by which to assign the
IP address:
• Static—Uses the IP configuration parameters entered in
the Network Properties dialog box.
DHCP (Dynamic Host Configuration Protocol)—Acquires
•
the IP configuration from a DHCP server. If no
satisfactory lease is obtained, the DHCP client attempts
to use the previously configured lease. If the previous
lease cannot be used, no IP address will be assigned to
this switch in order to avoid an IP address conflict.
• DHCPv6 (Dynamic Host Configuration Protocol version
6)—Acquires the IP configuration from a DHCP server. If
no satisfactory lease is obtained, the DHCP client
attempts to use the previously configured lease. If the
previous lease cannot be used, no IP address will be
assigned to this switch in order to avoid an IP address
conflict.
Enter the IP address of the DNS server.
Choose one of the following methods by which to assign the
IP address:
• Static—Uses the IP configuration parameters entered in
the Network Properties dialog box.
• DHCP (Dynamic Host Configuration Protocol)—Acquires
the IP configuration from a DHCP server. If no
satisfactory lease is obtained, the DHCP client attempts
to use the previously configured lease. If the previous
lease cannot be used, no IP address will be assigned to
this switch in order to avoid an IP address conflict.
• DHCPv6 (Dynamic Host Configuration Protocol version
6)—Acquires the IP configuration from a DHCP server. If
no satisfactory lease is obtained, the DHCP client
attempts to use the previously configured lease. If the
previous lease cannot be used, no IP address will be
assigned to this switch in order to avoid an IP address
conflict.
The suffix that is appended to the user-specified hostname
for the search.
HP StorageWorks SN6000 Fibre Channel Switch QuickTools Switch Management User Guide
Table 13 describes the
71