Connecting Application Servers With Single Or Multiple Nics To A Multi-Site San; Entering Vips In A Multi-Site San Configuration; Logging On To Volume - HP StorageWorks P4000 User Manual

Connecting application servers with single or multiple NICs to a Multi-Site SAN

1. On each application server, enter the cluster VIPs in the same order as on the Discovery tab of
the iSCSI Initiator Properties window.
Figure 6 Entering VIPs in a Multi-Site SAN configuration
.
2. On the Targets tab, select the volume to log on to.
3. Click Log On.
4. Select the Enable multi-path check box.
Figure 7 Logging on to volume
.
5. [Optional] If you want this volume to be available after rebooting, select the Automatically
restore... check box.
6. Click Advanced to open the Advanced Settings window.
16 Using MPIO