Table of Contents
Advertisement
2.
Prepare boot volume on HP 3PAR Storage System.
Refer to
"Creating Storage on the HP 3PAR Storage System" (page 17)
volume and export it to the host. Use the WWN recorded in
3.
Connect cable between host HBA port and HP 3PAR Storage System HBA port. Both direct
and fabric connections are supported.
4.
Power on host and check MP firmware level, refer to section 7 for requirements. Upgrade
firmware if needed. Then insert installation DVD and boot from DVD to this point:
Installation from HP-UX 1 1i v2 or 1 1i v3 DVDs
Use the procedure described in HP-UX 1 1i v2 and 1 1i v3 Implementation Guide from
docs.hp.com.
1.
Insert the DVD into the HP-UX host server, and the following screen appears:
Welcome to the HP-UX installation/recovery process!
Use the <tab> key to navigate between fields, and the arrow keys
within fields. Use the <return/enter> key to select an item.
Use the <return/enter> or <space-bar> to pop-up a choices list. If the
menus are not clear, select the "Help" item for more information.
Hardware Summary:
+----------------------+---------------+--------------------+[ Scan Again ]
| Disks: 1 ( 33.9GB)| Floppies: 0 | LAN cards: 3
| CD/DVDs: 1
| Graphics Ports: 0 | IO Buses: 7 | CPUs: 4
+----------------------+---------------+--------------------+
2.
Select H/W Details to verify that the HP 3PAR Storage System VV is visible.
[ H/W Details ]
Disk Drives:
Model
HP_36.4GST33675 34732
1/0/0/3/0.0x6.0x0
3PARdataVV
1/0/6/1/0.0x21410002ac0000b4.0x4320000000000000
3.
Select Root Disk then select 3PARdataVV.
/opt/ignite/bin/itool ()
¦
¦ +-------++----------++--------++-------------++----------+
¦ ¦ Basic ¦¦ Software ¦¦ System ¦¦ File System ¦¦ Advanced ¦
¦ ¦
¦ ¦
¦ ¦ Configurations: [ HP-UX B.11.31 Default ->] [ Description... ]
¦ ¦
¦ ¦ Environments: [ HP-UX Data Center Operatin ->] (HP-UX B.11.31)
¦ ¦
¦ ¦ [ Root Disk ] HP_36.4GST336753LC, 1/0/0/3/0.0x6.0x0, 3>
¦ ¦
¦ ¦ File System: [ Logical Volume Manager (LVM) with VxFS ->]
44
Booting the Host from the HP 3PAR Storage System
System Model: 9000/800/rp7420
| Tapes: 0
[ Install HP-UX ]
[ Run an Expert Recovery Shell ]
[ Advanced Options ]
[ Reboot ]
Capacity(Mb)
36864
+
\-------------------------------------------------------------------+¦
| Memory: 2040Mb
WWID
0x0011c6fffe28ddfc
0x50002ac0001000b4
to setup the boot
Step
1.
http://
|
|
|[ H/W Details ]
[ Help ]
¦
¦
¦
¦¦
¦¦
¦¦
¦¦
¦¦
¦¦
¦¦
¦¦
Advertisement
Table of Contents
