Oki OKIPAGE8w Manual page 10

MATERIAL SAFETY DATA SHEETS (continued)
CAS# 67762-90-7
3
OSHA PEL 15.0 mg/m
ACGIH TLV 10.0 mg/m
Note This product is not regulated under Section 313
of SARA, Title III.
Physical Data
Melting Point: 110°C (230°F)
Boiling Point: Not applicable
Vapor Pressure: Not applicable
Vapor Density (Air=1): Not applicable
Evaporation Rate (Butyl Acetate=1): Not applicable
Specific Gravity (H O=1): 1.15
2
Solubility in water: Negligible
Appearance and odor: Black granules, no odor
Fire and Explosion Hazard Data
Flash Point (Method Used): Not applicable
Flammable Limits
10
8wWarBk2.p65 10
for total dust
3
for total dust
Lower Explosive Limit: Not applicable
Upper Explosive Limit: Not applicable
Extinguishing Media: Water, CO
Foam
Special Fire Fighting Procedures: Do not use methods
that may create a dust cloud, such as high pressure water
and/or steam
Unusual Fire and Explosion Hazards:
Organic components decompose at 200-455°C (392-
851°F).
Material may explosively combust when finely
suspended in air.
Thermal decomposition of organic components may
result in release of oxides of carbon and nitrogen.
Health Hazards Data
Routes of Entry: Inhalation, Ingestion, Eyes, Skin.
1. Styrene-Butyl Acrylate Copolymer
Subcutaneous implantation of polymeric styrene
powder in rats has induced tumors at the site of
implantation.
11/6/98, 4:11 PM
, Dry Chemical, or
2