Boot Menu; Bootup Numlock State [On]; Full Screen Logo [Enabled]; Wait For 'F1' If Error [Enabled] - Asus P8H61 USB3 R2.0 User Manual

2.7

Boot menu

The Boot menu items allow you to change the system boot options.
UEFI BIOS Utility - Advanced Mode
Main
Bootup NumLock State
Full Screen Logo
Wait For 'F1' If Error
Option ROM Messages
Setup Mode
UEFI/Legacy Boot
PCI ROM Priority
Boot Option Priorities
Boot Option #1
Boot Option #2
Boot Override
> SATA: xxxxxxxxxxxx
> Hard Drive BBS Priorities
> CD/DVD ROM Drive BBS Priorities
2.7.1

Bootup NumLock State [On]

[On]
[Off]
2.7.2

Full Screen Logo [Enabled]

[Enabled]
[Disabled]
Set this item to [Enabled] to use the ASUS MyLogo 2™ feature.
Post Report [5 sec]
This item appears only when the Full Screen Logo item is set to [Disabled] and allows you to
set the waiting time for the system to display the post report. Configuration options: [1 sec] [2
sec] [3 sec] [4 sec] [5 sec] [6 sec] [7 sec] [8 sec] [9 sec] [10 sec] [Until Press ESC]
2.7.3

Wait for 'F1' If Error [Enabled]

When this item is set to [Enabled], the system waits for the F1 key to be pressed when error
occurs. Configuration options: [Disabled] [Enabled]
2-26
Ai Tweaker Advanced
Version 2.10.1208. Copyright (C) 2012 American Megatrends, Inc.
Sets the power-on state of the NumLock to [On].
Sets the power-on state of the NumLock to [Off].
Enables the full screen logo display feature.
Disables the full screen logo display feature.
Monitor
Select the keyboard NumLock state
On
Enabled
Enabled
Force BIOS
EZ Mode
Enabled both...
Legacy ROM
SATA: xxxxxxx
→←: Select Screen
↑↓: Select Item
SATA: xxxxxxx
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Shortcut
F5: Optimized Defaults
F10: Save
F12: Print Screen
Exit
Boot Tool
ESC: Exit
ASUS P8H61 R2.0 Series